Brickcom FB-130NP Manual de usuario descargar pdf (Pagina 11)

Hardware Reset

The Reset Button can be used to reboot the camera or restore it to factory default settings.

If the camera experiences a problem, rebooting the camera may correct the problem. If

the problem remains, please restore the camera to factory default settings and reinstall

the software.

To Reboot - Press and hold the Reset Button for one second using a paper clip or thin

object. Wait for the camera to reboot.

To Restore – Press and hold the Reset Button for ten seconds until the LED light turns off.

When successful restored, the LED will be blue during normal operation.

Note - By restoring the camera, all settings will be restored to the factory default

settings.

SD Card Capacity (*)

The network camera is compatible with SD/SDHC (Maximum 64GB) cards.

(*) These are optional features. Please refer to the Product List for the full list of

optional features that are available for this product

Reset Button

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sin comentarios

Brickcom FB-130NP Manual de usuario Pagina 11